Industrial Ferro Chargers

KODIAK-Ferro resonant transformer technology is the most widely used charger design in the North American industrial truck market. It affords maxi­mum protection of the battery utilizing a taper charge curve that is built into the transformer de­sign. It is not susceptible to control board or elec­tronic component failures. Any failure that may occur to the charger will always re­sult in no or low output to the battery rather than locking the charger at a high output rate.


Kodiak Specifications

  1. Efficiency: 86% typical
  2. Power Factor: 95% typical
  3. Rated Output Current: 100% of nameplate ratingat2.13V/Cell
  4. Regulation: +/-1 % at finish with an AC line variation of +/-10%


Premier Control

Fully automatic, it utilizes dv/dt-di/dt termination of charge. The control will start charging approximately 5 seconds after the battery is connected. Charge cycle termination is controlled by the slope of the battery’s voltage with relationship to time. The nearer to fully charged, the flatter the charge voltage curve.


Information Request